[ad_1]
Assalamu'alaikum Wr. Wb.
our case this time Lenovo A6000 stuck/jammed logo as shown above. Lenovo A6000 is already using a Quad Core cpu 1.2 GHz
Qualcomm Snapdragon MSM8916 410 . 1 GB of RAM, and internal memory that can be used application of 4.7 GB storage, 5 inch screen. not bad lah.
Yok we try flashing, flashing on lenovo computers and uses the A6000 HP him directly. This means that we will use the computer to provide a Recovery flashing we can use for flashing firmware directly via HP.
ok let's try
1. The STAGE FLASHING RECOVERY (dikomputer) - Donlot dulu his tools and materials:
- Adb-fastboot: http://kumpulbagi.com/ian-kian/everything-about-android-222484 adb/fastboot-win,1502117-.zip
- Recovery A6000: http://kumpulbagi.com/ian-kian/everything-about-android-222484/recovery,1502130. img
- Driver: http://kumpulbagi.com/ian-kian/everything-about-android-222484/lenovousbdriverv1-0-12,1502411. zip extract it and install it.
- First, extract the adb and fastboot donlot, then input the recovery file into folder ekstrack results an adb fastboot last
- second, press the shift (in keyboard) and hold it, while you right click in the folder ekstract adb-fastbot last to exit the menus like the picture, and select OPEN COMMAND WINDOWS HERE
- the third , will appear as images,
- Fourth, switch to your lenovo hape, go to mode fastboot mode, press the 2 button trick berbaringan somewhat longer. the Power button + Volume Down (-). Press and hold both his rather long, flared in hape to the writings of the lenovo n android logo only.
- Fifth, connect it to the computer and hape wait for your computer to finish installing the driver.
- Sixth, if installed, to further assure you should check into device manager reply already such images means that the drivers installed fine. Note, the AD6B1H Bootloader Interface.
- Seventh, after hape connect and recognizable computer, reopen the program adb-fastboot last in step 2 and ke3. Type fastboot devices and then press the enter key, the result is like a picture. Note 483c034 fastboot, each different from his numbers different from hape,
- the eighth, masi in adb-type fastboot command: fastboot recovery flash URrecovery.img then press enter and the result will be as shown.
- The ninth. Done flashing recovery. Please unplug your hape from the computer, unplug and plug it back in. batre Advanced ketahapan Flashing.
2. The STAGE FLASHING the FIRMWARE (in HP) - Download lenovo A6000 firmware: stock URhttp://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S032_150327_WCDB.zip (1 GB more file size)
- first, copy the firmware file download results above to the memory card, may be located outside of the folder
- second, getting into recovery mode menu how: hape in dead condition then push and hold the button VOL + VOL UP DOWN + POWER press and hold simultaneously the three that button. After Hape vibrate and break out the writings of lenovo, REMOVE the PENCETAN the POWER BUTTON but HOLD the PENCETAN BUTTON VOL + VOL UP DOWN to get into recovery mode menu.
- Third, use the vol up and vol down to select menu, then select apply sdcard update from menu, use the power button to OK.
- Fourth, after that select "Kraft-A6000_s032 ... zip" wait updating runs until finished
- fifth, Done. Hape will restart on its own, somewhat longer initial booting. wait patiently, but if not done booting is complete, unplug batre, enter recovery again, and do a data wipe and cache wipe.
Completed.
Thanks for stopping by her. .. ^_^
[ad_2]
