[ad_1]
Canon Pixma Mp237 Printer Damage And how to fix it-the Printer is indeed very old error will hinder our work. For this time Lapkom will share some mistake or error on printer canon pixma Mp237.
you should know that is about the printer Canon pixma Mp237, there there is a indicator light that tells a fault or error in your printer's natural, well how do I look? enough you see the glowing indicator light blinks, code lights that will analyze what damage the error in natural si printer.
Well, here is some code indicator light damage Mp237 Canon printers and how to overcome it:
- Error 1000 Lights Blinking twice: paper no/detected, please enter at the rear paper tray (paper) then press the Black/Colour printers.
- Error 1486 1487, Lights Blinking as much as 7 times:P emasangan Cartridge is incorrect, please fix the location and locking the Cartridge, if still persists replace the Cartridge with a new one.
- Error 1684 Lights Blinking as much as 14 times: Cartridge is not compatible with the printer or the location of the Cartridge, make sure the correct installation position, if it continues, please replace with a new Cartridge.
- Error Light Blinking 1700 as much as 8 times: the ink Absorber is almost full, please do a head cleaning on the printer.
- Error 1687 Light Blinking four times: the location of the Cartridge is not appropriate, please fix the location of the Cartridge and the printer pengunciannya.
- Error 1682 Lights Blinking as much as 15 times: Cartridge is damaged, please replace the Cartridge with a new one.
- Error 1300 Lights Blinking as much as 3 times: paper Jammed Paper, please clear the paper that concern on the printer.
- Error 1485, 1401, 1403 Lights Blinking as much as 5 times: the Printer does not find the Cartridge, please fix the location of the Cartridge in the printer, install correctly, if it persists replace the Cartridge with a new one.
- Error Light Blinking 1186 by as much as 13 times: cannot read ink available on Cartridge, please press the Stop/Reset button to ignore the warning Error.
- Error Light Blinking 1188 16 times: Cartridge is not detected or ink on Cartridge runs out, please press the button Stop/Reset for 5 seconds, turn off the printer and turn on again.
- 5100 error Light Blinking twice: this is caused because menyakut paper on the printer, please clear the paper, turn off then turn on again.
- Error B200 Light Blinking 10 times: turn off the Printer and its electrical power supply let sit for a moment until a few minutes then connect electricity and switch it on again.
Now that's some defect or Error on a canon pixma Mp237 printer and how to fix it, and you can you fix yourself without the hassle of taking it to the handyman service. Good luck and thanks a lot for your visit.
[ad_2]
