[ad_1]
If you have a Flash unreadable on a laptop, what would you do??? There is nothing wrong you try fixing Flash tips here. If the pendrive you have problems, we recommend you read how to fix flahdisk with penjelasanya. Maybe I'll share tips that will make it a little for you who are looking for a solution to overcome the problem of Flash damage.
Here are a few keruskan that plagued Flash:
- Flash dead total
- Flash that unreadable capacity
- Flash which is unreadable due to virus
- Flash disk that can't be read at all on a computer
- Flash is not detected in disk management
- and
how do I fix an unreadable Flash in laptop/broken?
In penagannya all brands of Flash is almost the same, whether it's Flash brand toshiba, kingston, hp, sandisk and others. An awful lot of that sharing how to resolve an unreadable Flash on the computer, but by the number of ways that exist after they will successfully repaired. So for that you need to try them one by one because we cannot know in detail why flasdisk could not be detected. Okay just, it should please you few tips which I review here.
Step # 1-check with the operating system of the computer/laptop etc.
the first step that you can do to overcome the Flash unreadable is checked with other PC/laptop. Well, you could use a computer/laptop that is different from the previous ones and then plugs into the computer flahdisk. If detected in the computer means the problem is not in your system but on flasdisk operations. You can install the drivers on the computer and flasdisk if still not be detected can re-install your computer.
Step # 2: M emperbaiki Flash which is unreadable with cmd
may have many know with a tool named cmd/command prompt. For the uninitiated tools this one I will explain it a bit for you. CMD is the default application tools or windows that serves as a tool to execute the file by way of entering commands. in my opinion, cmd is a multifunctional tool because it can be used to run a lot of commands specifically related to computer systems. Just following the steps:
- Flash/Insert Plug to laptop/computer
- press windows + R on the keyboard to open the RUN.
- After the Run is open, then type cmd and press enter.
- Open windows explorer (press the Windows key + R) and search the name of your pendrive. C:/place names normally used for system, D:/and E:/for data and G:/to Flash.
- E.g. pendrive detected by drive letter g (G:) flasdiksku examples
- type command g: in CMD and press enter
- Then type the command chkdsk/f and then press enter. and type the command again Y to vote yes.
- The last step you are asked to restart the computer, then just select yes.
Step # 3: software to improve an unreadable Flash
if the above still can't fix, tips the last of this I could try IE using additional software. To get the software itself you can find download link itself with the inclusion of the name of the software to the google search. Okay just Following some software that you can use to improve your pendrive.
- Repair 2.9.1.1
- the HP Drive Boot Utility
- the HP USB Disk Storage Format Tool
- AlcorMP-UFD
- Flash Repair
- Super Stick Recovery Tools
- brings JetFlash Recovery Tool
so the Tips & tricks about how to fix the Flash that is Unreadable in PC/Laptop this time good luck, and may be useful.
[ad_2]
