[ad_1]
a few days ago I had 2 Redmi hardbrick where can't be switched on, dicharger ga no reaction, can't get into fastboot, plug it into the PC port kedetek as Qualcomm USB HS-9008 QDLoader . Lucky for those who have Xioami product due to the rare vendors who want to provide ROM Fastboot MiFlash and software for flashing.
If you are experiencing the same thing as I can try flashing the ROM Fastboot Redmi 2 with software provided by Xioami i.e. the Miflash. To follow this tutorial please make sure you have a computer/Laptop device, In this tutorial I'm using Windows 7, so I use windows 7 recommendations Yes.
Solution Unbrick using Fastboot ROM
- Download ROM Fastboot 6.5.2.0 Global
- Selanjuntya Extract the file in the directory D:/
- Install the MiFlash Tool on a windows computer.
- Next connect the Redmi 2 to the PC while pressing the Volume Down and Power , check the Control Panel Device Manager – reply port already kedetek ( see figure marked red ) remove the volume key and power.
-
- Selanjuntya run the Miflash later appeared to our device port ( reply yet appear try refresh through the refresh button in the Miflash ), then click to Browse select Advanced
- In the Advanced Menu of the contents as follows:
- Script Fastboot – URflash_all.bat (located in the folder Fasboot ROM)
-
NvBoot Script – just Skip ga filled
-
Flash programmer – URMPRG8916.mbn (there are in the folder images)
-
Boot Image - UR8916_msimage.mbn
-
the RAW XML Files - URrawprogram0.xml
-
Patch XML Files - URpatch0.xml
- once filled correctly click " OK
- after that, click the" Flash ", selanjuntya flashing begins ... port tdi kedetek Qualcomm HS USB-9008 QDLoader will turn into Qualcomm HS USB-9006 Diagnostics
- after the words" The complete successfull operation ", disconnect the battery Redmi 2 and attach it again then turn on the
- 2 Redmi Now you have life again though all data in the Internal erased.
[ad_2]
